AT&T TREK 2 HD - Page 39

37
1. From the home screen, tap Settings Wi-Fi.
2. Slide the switch to the On position.
3. Tap Add network.
4. Enter the network SSID (name). If necessary, enter security or
other network conguration details.
5. Tap SAVE.
Connecting to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your tablet to access points that supply WPS.
You can use one of the following methods to connect your tablet
to a wireless network using WPS:
Method One: WPS Button (Recommended)
1. From the home screen, tap Settings Wi-Fi.
2. Slide the switch to the On position.
3. Tap Advanced WPS Push Button.
4. Press the WPS button on the wireless router. The access point
will recognize your tablet and add it to the network.
Method Two: PIN
1. From the home screen, tap Settings Wi-Fi.
2. Slide the switch to the On position.
3. Tap Advanced WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the
access point’s setup page.
Aer entering the PIN, your tablet automatically nds the access
point and congures the connection.
CONNECTING TO NETWORKS AND DEVICES