AT&T TREK 2 HD - Page 40

38
Note: For detailed information about the WPS feature of the
access point, please refer to its documentation.
Forgetting a Wi-Fi Network
You can make your tablet forget the details of a Wi-Fi network
that you added—for example, if you don’t want the tablet to
connect to it automatically or if it is a network that you no
longer use.
1. From the home screen, tap Settings Wi-Fi.
2. Slide the switch to the On position.
3. Tap the Wi-Fi network name and then tap FORGET.
Adjusting Advanced Wi-Fi Settings
1. From the home screen, tap Settings Wi-Fi.
2. Tap or Advanced to adjust the following settings:
• Saved networks: View a list of saved networks.
• Network notication: Enable notications when Wi-Fi is on
and an open network is available.
• Keep Wi-Fi on during sleep: Set conditions for keeping Wi-Fi
on in Sleep mode.
• MAC address: Check the MAC address.
• IP address: Check the tablet’s IP address.
• Install certicates: Install certicates needed for
connecting to certain Wi-Fi networks.
• Wi-Fi Direct: Use the Wi-Fi Direct™ feature.
• WPS Push Button: Connect to a WPS network via the push
button method.
CONNECTING TO NETWORKS AND DEVICES