Atari 1010 Service Manual

CORRECT LOADING TEST
Rewind and remove the test tape.
Insert and rewind the blank tape (FD100009).
Simultaneously press the RECORD and PLAY buttons.
At this point, the computer should beep twice. If it does not, see Step 7.
Press RETURN to tape the test information.
The cassette deck should run for several seconds. If an ERROR appears, the
cassette deck is defective. Proceed to Diagnostic Flowchart A for the
appropriate unit (1010S page 4-2, 1010C page 4-15).
Rewind the blank tape.
Press the PLAY button.
Press RETURN to load the information from the tape.
If an ERROR message appears, the cassette deck is defective. Proceed to
the appropriate Diagnostic Flowchart A for the unit (1010S page 4-2, 1010C
page 4-15).
When READY appears at bottom left of the screen, type RUN and press
RETURN.
If the test program does NOT start, the cassette deck is defective. Proceed
to the appropriate Diagnostic Flowchart A for the unit (1010S page 4-2,
1010C page 4-15).
If the test program does start, the cassette deck is in good working
condition.
ATARI 1010 Cassette Recorder 3-6

Atari 1010 Specifications

General

Brand	Atari
Model	1010
Category	Cassette Player
Language	English