Atari 2600 Owner's Manual

INSTALL SWITCH BOX
Your TV/IGAME Switch Box attaches easily to your TV's
VHF antenna screws. Find the picture that looks the most
like the back of your TV set and follow those instructions.
A flat screwdriver is required.
IF YOUR TELEVISION HAS FOUR SCREWS ONLY
A. Disconnect the twin-lead wire from your television and
attach it fo the ANTENNA screw terminals on the
TVIGAME Switch Box.
B, Connect the twin-lead wire from the TV/GAME Switch
Box to the VHF antenna terminals on your television set.
uHF
VHF
s )
In each of the preceding cases, you may need to buy
an “impedance-matching transformer” (also called a
“palun coil”). The transformer is necessary only if you do
not have a flat twin-lead antenna wire. It is available at
Q nominal cost from your local TV and stereo stores.
By attaching a TV/GAME Switch Box to each television in
your home, you can easily move your ATARI 2600 Video
Computer System from room to room. Extra TV/GAME
Switch Boxes may be purchased separately.

Atari 2600 Specifications

General

Brand	Atari
Model	2600
Category	Game Console
Language	English