Atari 2600

IF YOUR TELEVISION HAS A SHORT ROUND CABLE:
A. Attach the televisions short loose-hanging cable to
the connector next to it on your television set.
B. If you have a round antenna cable:
Disconnect the cable from your television.
= Screw the cable into the impedance-matching
transformer.
= Attach the impedance-matching transformer to the
ANTENNA screw terminals on the TV/GAME Switch Box.
Or, if you have flat twin-lead antenna wire:
® Disconnect it from the television and attach it to the
ANTENNA screw terminals on the TV/GAME Switch Box.
C. Connect the twin-lead wire from the TV/GAME Switch
Box to the VHF antenna terminals on your television set.
IF YOUR TELEVISION IS CONNECTED TO CABLE TV
A. Disconnect the cable from the back of your television
Note: Your Cable TV company may have already supplied
you with an impedance-matching transformer.
B, Attach the twin leads from the impedance-matching
transformer to the ANTENNA screw terminals on your
TVIGAME Switch Box.
C. Screw the cable into the impedance-matching
transformer.