Atari 7800 ProSystem User Manual

1. Check the channel selector
switch on the back of the con-
sole to
be sure
it
is set to the
3. Plug the Power Adapter cable
jack
into
the POWER
connector
at
the back
of
the console.
position.
4. Plug the
Power
Adapter into
2. Set your television channel
selector
to
Channel
3.
If Charv
nel
3 is
broadcasting in your
area, set the television channel
selector switch to Channel 2
and change
the channel selector
switch on the console to the •
any convenient 120-volt AC
electrical wall outlet.
Important:
Use
only the Power
Adapter packed with your ATARI
7800.
Use of any
other power
supply could damage the console.
Setting Up the
Console
6

Atari 7800 ProSystem Specifications

General

Brand	Atari
Model	7800 ProSystem
Category	Game Console
Language	English