This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT: READ BEFORE USE
In very rare circumstances, some people may experience epileptic
seizures when viewing flashing lights or patterns in our everyday life.
Flashing lights and patterns are also common to almost any video
game. Please consult your physician before playing ANY video game if
you have had an epileptic condition or seizure OR if you experience
any of the following while playing - Altered vision, eye or muscle
twitching, mental confusion or disorientation, loss of awareness of the
surroundings or involuntary movements.
It is advised to take a 20-minute rest after 1 hour of continuous play.
Game Console Appearance and Button List
The image below shows the location of the output ports and buttons.
(The illustration is for reference only.)
NOTE:
Must use the AC adapter included as power supply to the console.
Do not connect the AC adapter to the power input other than the above
specifications.
AC adapter is not a toy.
INPUT: 100V -240V AC/50HZ -60HZ
OUTPUT: 5V DC/500mA
PLUG: --(.+
AC Adapter Specification
Power Button
Start Button (Original Reset Button)
Difficulty Button – Left Player
Difficulty Button – Right Player
Select Button – Game Option
1
2
3
4
5
6
7
8
9
DC 5V Input Port
Left Controller Port
Right Controller Port
AV Cable
IR Receiver
1
2
7
6
9
5
4
3
8
Battery Safety
* Never try to short-circuit the battery terminals.
* Rechargeable batteries are to be removed from the toy before being
charged.
* Rechargeable batteries are only to be charged under adult supervision.
* Do not charge non-rechargeable batteries.
* Batteries are to be inserted with the correct polarity as indicated inside
the battery compartment.
* Do not mix old and new batteries. Do not mix batteries of different
types: standard (carbon-zinc), alkaline, or rechargeable (nickel-cadmium)
* Remove batteries during long period of non-use.
* Always remove flat batteries from the product.
* Dispose batteries safely. Do not dispose this product or any
batteries in a fire.
Changing The Batteries For The Controller
Remove the battery compartment cover
using a screwdriver.
Place two AAA batteries into the battery
compartment. Make sure they are
inserted with the correct polarity as
shown inside the battery
compartment.
Secure the battery compartment cover by
clipping it back to place and using the
screwdriver to tighten the screw.
(Screwdriver is not included in the package of this product.)
Requires 2 AAA batteries. Expected battery life up to 150 hours.
1
2
To Next Page
Loading...
Need help?
General
