Atari PONG 4P - Page 16

PONG 4P D&B Manual
11/18/2019
15
Step 3 Utilize Allen wrench to loosen 4 screws indicated by circles; remove the Metal
plates.
Step 4 Place the Rotational marquee on the Monitor assembly. Guide the cable from
Monitor assembly to Rotational marquee and connect.
Tighten 4 screws to secure the Rotational marquee to the Monitor assembly.
Secure back the Metal plates.
Step 5 Utilize dual adhesive to affix the PONG foam core sign to the top Rotational
marquee.
Note: Use of Ladders should be supervised and extreme caution exercised.
Name
Cross recessed
hexagon screw set
SPEC
M6×16 black
Qty
4
Metal plate
Monitor assembly
Rotational marquee
PONG foam core sign