TOOL PREPARATION
1. Check tool for worn or damaged parts. Repair or replace as
necessary.
2. Check trigger to ensure it moves freely.
3. Connect tool to air supply.
4. Adjust air pressure based on paint viscosity and manufacturer’s
recommendation. (Fig. 2)
5. Pour paint into cup.
Figure 2:
GUN HANDLING
For best results, please follow these basic guidelines:
1.Keep the spray gun perpendicular to the surface. Spraying in an
arc will not give good results. (Fig. 3)
2.Keep gun moving from one side to the other while spraying. If you
To Next Page
Loading...