Automatic Bottom Blowdown Control Valve
1. SAFETY INFORMATIONS
National and local regulations must be taken into consideration while electrical or mecanical installation.
Please make sure to remove the main supply before installation and maintanance.
Otherwise this may cause damage to the product, personal injuries or even death.
Before Blowdown Valve assembly, disassembly and maintenance ensure that any pressure
is isolated and safely vented to atmospheric pressure (0 bar g). Otherwise steam or hot water
leakage may occur. If there is a stop valve before Blowdown Valve, consider this valve closed
Touching to hot surfaces may hurt personnel. When installing or displacing the valve, please
make sure that all equipment temperatures are in safe level.
All assembly, disassembly and maintenance should only be carried out when the system is cold.
The manufacturer expressly rejects any claims for damage caused by improper installation.
Installation, commissioning and maintenance of this device must be done by a qualified person in compliance with the
operating instructions. Otherwise device and related equipments may be damaged and personnel may be injured.
"Steam & Control Technologies"
To Next Page
Loading...