atecpool Brightbot 6000 - Control Box Operations and Indicator Lights; After Cleaning Procedure; After Cleaning Method 1

EN EN
07 08
2
Control box
2.1 Some basic functional operations of the cleaner can be performed via the
control box (more functions can be experienced using App), after selecting
corresponding mode, the cleaner can start automatic cleaning of the
swimming pool immediately by clicking START/STOP.
3
Indicator Light of the Cleaner
4
After Cleaning
2.2 Interface function and indicator light
REGULAR
ULTRA
FLOOR
CUSTOM
FAST
WATERLINE
Identification
Button
Indicator
light
The light flickers in case of abnormalities
/
Method 1:
1. Click "One-button Recycling" button in the control box or App.
2. Wait for the cleaner to get close to waterline position of the swimming pool
automatically.
3. Hold the handle of the cleaner to pull it out of the water surface, and hang it
above the water surface for 10-20s to empty the water inside it.
REGULAR ULTRA FLOORCUSTOMFAST WATERLINE
WiFi
ERR
START/STOP
PICK UP
MODE
Cleaneric Pool Cleaner
REGULAR ULTRA FLOORCUSTOMFAST WATERLINE
WiFi
ERR
START/STOP
PICK UP
MODE
Cleaneric Pool Cleaner
Homepage
Timing/Delay
Manual
Mine
One-key reclycling
27℃
Temperature
connected
The control box App
WiFi
Cleaning
Count-
down
Waterline
Mode
Pool
Bottom
Mode
Custom Mode
Rapid Mode
Enhance-
ment Mode
Standard Mode
Error
Connection status of the
control box and WiFi
Display the remaining
cleaning time
2h; pool wall and waterline
2h; pool bottom
Set in APP
1h; pool bottom, pool
wall and waterline
3h; pool bottom, pool
wall and waterline
2h; pool bottom, pool
wall and waterline
The cleaner and the
control box prompt error
The light flickers when the mobile
phone/tablet WiFi has access to the control
box; and the light is on after the APP detects
the cleaner
Light statusDescriptionDescription
Count-
down
display
If selecting this mode, light of
corresponding mode will be on
/
START/STOP
Recycling
Mode
Switching
Short Press:
Start/Suspend;
Long Press: Stop
Shot Press: enter the
one-button recycling mode
Shot Press: switch the
cleaning mode (custom
mode shall be set in APP)
The yellow light is on when stopping
cleaning;
The green light is on when starting to
clean;
The green light flickers when suspending
the cleaning;
The red light is on in case of abnormality
with the control box;
The red light flickers in case of abnormality
with the cleaner.
The light is on when entering Recycling Mode
The light is on upon energization
Light status
Yellow light is on in a
circular way
Green light on in a
circular way
Green light flickers
Purple light on
Yellow light on
White light on
Description
The filter basket is blocked
Red light flickers
Abnormal errors of the cleaner
Cleaning
Cleaning Suspended
Not placed in water
Standby in water
Self-inspecting