Atem Production Studio 4K

Need help?

Do you have a question about the Atem Production Studio 4K and is the answer not in the manual?

Summary

Getting Started

Understanding the ATEM Switcher

Hardware Setup and Software Installation

Plugging in an ATEM Hardware Panel

Instructions for connecting and powering ATEM hardware control panels.

Installing Blackmagic ATEM Software on Mac

Steps for installing ATEM software and drivers on macOS systems.

Computer Connectivity and Control

Plugging in your Computer

Switcher Configuration and Settings

Switcher Settings

Configuration options for ATEM switchers, including video standards and audio preferences.

Input and Multi View Management

Source and Control Panel Integration

Network Configuration

Connecting to a Network

Operational Workflows

Setup Workflow with ATEM Constellation 8 K

Software Updates

Updating the Software

Procedures for updating ATEM switcher and hardware panel software.

Video Output Management

Connecting Video Outputs

Information on various video outputs available on ATEM switchers.

Front Panel Operation

Using the ATEM Constellation 8 K Front Panel

ATEM Software Control Usage

Using ATEM Software Control

Comprehensive guide to controlling ATEM switchers via software.

Media Manager and Audio Mixer

Audio Mixer

Camera Control and Mix Effects

Camera Control

Remotely controlling Blackmagic Design cameras via ATEM software.

Mix Effects

Transition and Keyer Management

Transition Control and Upstream Keyers

Managing transitions and upstream keyers for video effects.

Processing and Audio Features

Audio Mixing and Monitoring

Detailed guides on audio mixing, monitoring, and advanced controls.

Advanced Audio Configuration

Shaping your Audio Mix using Advanced Fairlight Controls

Switcher Settings and Standards

Changing Switcher Settings

Setting the Switcher Video Standard

Selecting the appropriate video standard for the ATEM switcher and inputs.

SuperSource and Macros

Using SuperSource (Picture in Picture)

Using Macros

Automating sequences of switcher actions using macros.

Macro Recording and Management

Recording Macros

ATEM Camera Control Panel Operation

Connecting the Panel to your Switcher

Changing Network Settings

CCU Panel Controls

Scene Files and Camera Settings

Camera Image and Lens Adjustment

Color Balance Controls

Tally Signal Management

Sending Tally Signals via a GPI and Tally Interface

Connecting ATEM switchers to GPI/Tally interface for tally signal distribution.

Audio Source Management

Using Audio

Connecting and managing audio sources for ATEM switchers.