Need help?Do you have a question about the Atem Constellation HD and is the answer not in the manual?
Explains the Mix Effects (M/E) style of operation in switchers.
Compares A/B direct switching to M/E style, highlighting differences and potential confusion.
Details the ATEM switcher's role in video processing and connectivity for control panels.
Instructions on connecting power to the ATEM Constellation HD via an IEC cable.
Guidance on connecting SDI cameras and other HD sources to the switcher's SDI inputs.
Information on using embedded SDI audio and external analog audio inputs.
Instructions on connecting an SDI monitor to the multiview output for source monitoring.
Explains the front panel's talkback and call buttons for direct access to communication features.
Describes the LCD menus on the front panel for accessing switcher operations and settings.
Settings for transition control, language selection, and MIDI control.
Contains settings for video standard, media pool, and camera control monitoring output.
Enables changing labels for switcher inputs, outputs, and media players.
Options to save startup state or save settings as an XML file.
Used for hot-switching background sources to the program output, indicated by red illumination.
Used for selecting background sources on the preview output, indicated by green illumination.
Covers CUT, AUTO/RATE, Fader Bar, Transition Style, and PREV TRANS functions.
Contains controls for color generators, SuperSource, upstream keyers, transitions, downstream keys, and fade to black.
Controls for ATEM switcher's media players and connected HyperDecks.
Manually setting timecode values or resetting the counter to zero.
Adjusting the audio mix for headphones, including master, talkback, and sidetone levels.
Enhancing and refining sound quality using advanced Fairlight audio controls.
Opening the equalizer for inputs or master output to control specific frequencies.
Adjusting frequency and gain by clicking and dragging handles on the graph.
Enhancing and finessing audio using dynamics controls like expander, gate, compressor, and limiter.
Explains the camera control feature in ATEM Software Control for managing Blackmagic cameras.
Details the camera control interface, selection, channel status, and settings.
Interface for primary color correction, allowing adjustments to shadows, midtones, and highlights.
Steps to route auxiliary outputs using the system control menu on ATEM hardware panels.
Arranging multiple sources in preset layouts, adjusting position, size, and crop.
Using Art settings to display background or foreground graphics on screen boxes.
Details the ATEM 1 M/E Advanced Panel for controlling switchers with one ME or larger systems.
Simple steps for plugging in the hardware panel, including power and Ethernet connections.
Procedure to modify the IP address settings on an ATEM Advanced Panel.
Performs an immediate transition of program and preview outputs, overriding selected style.
Performs selected transition at a predetermined rate using the AUTO button.
Performing gradual transitions by interpolating between sources, adjustable by mix rate.
Gradual transitions through a third source for flashes or sponsor logos.
Transition using shape patterns to replace sources.
Using the DVE processor for transitions like squeeze.
Explains the concept of keying and the requirement for fill and key signals.
Uses one video source to make black areas transparent, revealing the background.
Used for weather broadcasts or graphics, combining images by removing a specific color.
Detailed chroma sampling and adjustment options for better keying and blending.
Adjusting foreground mask opacity and background opacity for clean separation.
Parameters for downstream keyers including clip, gain, rate, and inverse.
Installing a Photoshop plug-in to download graphics directly to the ATEM media pool.
Automating sequences of switcher actions by recording and playing back button presses.
Comprehensive recording of switcher actions for precise repetition.
Step-by-step guide to creating a macro within ATEM Software Control.
Instructions for connecting power to the ATEM Camera Control Panel via IEC or 12V DC input.
Steps to connect the ATEM Camera Control Panel to the switcher via Ethernet.
Manually setting the panel's IP address and entering the switcher's IP address for identification.
Fine-tuning gain/iris and pedestal/master black levels using the joystick.
Explains two control modes: relative and absolute, for synchronizing settings.
Connecting and controlling HyperDeck disk recorders using ATEM Software Control or Advanced Panel.
Connecting Blackmagic HyperDecks to the switcher via Ethernet and SDI.
Setting up HyperDeck connection details like IP address and input source.
Automatically rolling video when switched to program output.
Controlling connected HyperDecks via the Media Players tab in ATEM Software Control.
Assigning switcher inputs to HyperDeck slots for control.
Entering the HyperDeck's IP address for Ethernet control via ATEM Advanced Panel.
Sending tally signals to monitors and cameras to indicate sources on air.
Configuring network settings for GPI and Tally Interface communication with ATEM switcher.
Receiving digital audio via MADI channels and mixing into program output.
Connecting the Micro Panel via USB and launching ATEM Software Control.
Adjusting color correction using trackballs and knobs on the Micro Panel.
Controlling lift, gamma, and gain color wheels with trackballs.
Procedures for updating ATEM switcher and hardware panel software via USB or Ethernet.
RJ45 pinout for talkback connector on ATEM Constellation switchers.
RS-422 pinout diagrams for DE-9 and RJ12 connectors used in PTZ control.
Protocol for sending control messages embedded in digital video streams for camera control.
Lists and describes defined commands, including categories and parameters.
Parameters related to video settings like mode, gain, white balance, exposure, and recording format.
Parameters for lift, gamma, gain, offset, contrast, luma mix, color adjust, and reset.
VISCA commands for controlling pan, tilt, and zoom of PTZ cameras.
Lists commands and descriptions for controlling HyperDeck via Ethernet.
Information on connection, basic syntax, and single line command syntax.
Describes the primary flow of tally information from master to slave devices.
Structure of tally status bits (program, preview) and version number.
Fastest way to obtain help is via Blackmagic Design online support pages.
How to check the installed ATEM software version via the About ATEM Software Control window.
Checking the Blackmagic Design support center for the latest software updates.
Caution to disconnect power before servicing and information on fuses.
Explains the Mix Effects (M/E) style of operation in switchers.
Details the ATEM switcher's role in video processing and connectivity for control panels.
Instructions on connecting power to the ATEM Constellation HD via an IEC cable.
Guidance on connecting SDI cameras and other HD sources to the switcher's SDI inputs.
Instructions on connecting an SDI monitor to the multiview output for source monitoring.
Explains the front panel's talkback and call buttons for direct access to communication features.
Describes the LCD menus on the front panel for accessing switcher operations and settings.
Explains how to connect the ATEM switcher and control panel via a network for more powerful system integration.
Describes the main control interface selected when ATEM Software Control is launched.
Settings for transition control, language selection, and MIDI control.
Allows assigning inputs to specific buttons on the preview and program rows.
Guides on selecting the operating video standard appropriate for the broadcasting region.
Enables changing labels for switcher inputs, outputs, and media players.
Settings to configure IP address, select inputs, and manage auto roll for HyperDecks.
Options to save startup state or save settings as an XML file.
Used for hot-switching background sources to the program output, indicated by red illumination.
Used for selecting background sources on the preview output, indicated by green illumination.
Covers CUT, AUTO/RATE, Fader Bar, Transition Style, and PREV TRANS functions.
Contains controls for color generators, SuperSource, upstream keyers, transitions, downstream keys, and fade to black.
Controls for ATEM switcher's media players and connected HyperDecks.
Manually setting timecode values or resetting the counter to zero.
Adjusting the audio mix for headphones, including master, talkback, and sidetone levels.
Enhancing and refining sound quality using advanced Fairlight audio controls.
Opening the equalizer for inputs or master output to control specific frequencies.
Adjusting frequency and gain by clicking and dragging handles on the graph.
Enhancing and finessing audio using dynamics controls like expander, gate, compressor, and limiter.
Explains the camera control feature in ATEM Software Control for managing Blackmagic cameras.
Details the camera control interface, selection, channel status, and settings.
Interface for primary color correction, allowing adjustments to shadows, midtones, and highlights.
Steps to route auxiliary outputs using the system control menu on ATEM hardware panels.
Arranging multiple sources in preset layouts, adjusting position, size, and crop.
Using Art settings to display background or foreground graphics on screen boxes.
Details the ATEM 1 M/E Advanced Panel for controlling switchers with one ME or larger systems.
Simple steps for plugging in the hardware panel, including power and Ethernet connections.
Configuring hardware panel network settings to match the switcher's subnet and IP address.
Describes the basic cut transition performed directly from the program bus or CUT button.
Automatically transitions between sources at a predetermined rate using the AUTO button.
Performing gradual transitions by interpolating between sources, adjustable by mix rate.
Gradual transitions through a third source for flashes or sponsor logos.
Transition using shape patterns to replace sources.
Using the DVE processor for transitions like squeeze.
Explains the concept of keying and the requirement for fill and key signals.
Uses one video source to make black areas transparent, revealing the background.
Used for weather broadcasts or graphics, combining images by removing a specific color.
Detailed chroma sampling and adjustment options for better keying and blending.
Adjusting foreground mask opacity and background opacity for clean separation.
Parameters for downstream keyers including clip, gain, rate, and inverse.
Installing a Photoshop plug-in to download graphics directly to the ATEM media pool.
Automating sequences of switcher actions by recording and playing back button presses.
Comprehensive recording of switcher actions for precise repetition.
Step-by-step guide to creating a macro within ATEM Software Control.
Instructions for connecting power to the ATEM Camera Control Panel via IEC or 12V DC input.
Steps to connect the ATEM Camera Control Panel to the switcher via Ethernet.
Manually setting the panel's IP address and entering the switcher's IP address for identification.
Setting ISO and gain using master gain buttons on the camera control panel.
Explains two control modes: relative and absolute, for synchronizing settings.
Connecting and controlling HyperDeck disk recorders using ATEM Software Control or Advanced Panel.
Connecting Blackmagic HyperDecks to the switcher via Ethernet and SDI.
Setting up HyperDeck connection details like IP address and input source.
Automatically rolling video when switched to program output.
Controlling connected HyperDecks via the Media Players tab in ATEM Software Control.
Assigning switcher inputs to HyperDeck slots for control.
Entering the HyperDeck's IP address for Ethernet control via ATEM Advanced Panel.
Sending tally signals to monitors and cameras to indicate sources on air.
Configuring network settings for GPI and Tally Interface communication with ATEM switcher.
Receiving digital audio via MADI channels and mixing into program output.
Connecting the Micro Panel via USB and launching ATEM Software Control.
Adjusting color correction using trackballs and knobs on the Micro Panel.
Controlling lift, gamma, and gain color wheels with trackballs.
Procedures for updating ATEM switcher and hardware panel software via USB or Ethernet.
RJ45 pinout for talkback connector on ATEM Constellation switchers.
RS-422 pinout diagrams for DE-9 and RJ12 connectors used in PTZ control.
Protocol for sending control messages embedded in digital video streams for camera control.
Lists and describes defined commands, including categories and parameters.
Parameters related to video settings like mode, gain, white balance, exposure, and recording format.
Parameters for lift, gamma, gain, offset, contrast, luma mix, color adjust, and reset.
VISCA commands for controlling pan, tilt, and zoom of PTZ cameras.
Lists commands and descriptions for controlling HyperDeck via Ethernet.
Information on connection, basic syntax, and single line command syntax.
Describes the primary flow of tally information from master to slave devices.
Structure of tally status bits (program, preview) and version number.
Fastest way to obtain help is via Blackmagic Design online support pages.
How to check the installed ATEM software version via the About ATEM Software Control window.
Checking the Blackmagic Design support center for the latest software updates.
Caution to disconnect power before servicing and information on fuses.
General| Aux Outputs | 4 x SDI |
|---|---|
| Power Supply | 1 x Internal 100-240V AC |
| SDI Rates | 1.5G, 3G |
| Control Panel Connection | Ethernet |
| Upstream Keyers | 4 |
| Downstream Keyers | 2 |
| Chroma Keyers | 4 |
| Built in MultiViewers | 1 |
| Video Standards | 720p, 1080i, 1080p |
| Video Outputs | 8 x SDI |
| Audio Inputs | 2 x XLR, 1 x RCA |
| Multiview Outputs | 1 x SDI |
| Control Panel | Optional |
| Timecode Connection | BNC |
| Reference Input | BNC |
| Tally Output | Yes |
| Computer Interface | Ethernet |
| Talkback | Yes |
To Next Page
