Need help?Do you have a question about the ATEN VM0808H and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | VM0808H |
| Number of Inputs | 8 |
| Number of Outputs | 8 |
| Video Input | HDMI |
| Video Output | HDMI |
| HDMI Version | 2.0 |
| HDCP Compatibility | HDCP 2.2 |
| HDCP Support | Yes |
| Housing | Metal |
| Rack Mountable | Yes |
| Maximum Resolution | 4K@60Hz |
| Video Resolutions | Up to 4K@60Hz |
| Control | RS-232, IR, Ethernet |
| Control Interface | RS-232 |
| Power Supply | 100-240V AC, 50/60Hz |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
Details FCC, CE, and KC regulatory compliance statements for the device.
Explains the usage and ownership of the HDMI trademark.
Provides crucial safety precautions for operating the device safely.
References the Chinese standard for hazardous substances in electronic products.
Information on registering the product and contacting technical support via phone.
Introduces the VM0808H and highlights its main functionalities and benefits.
Details the necessary source devices, display devices, and cables for installation.
Lists the operating systems compatible with the VM0808H for source devices.
Describes the front panel, rear panel, and IR remote control components.
Step-by-step guide for mounting the VM0808H unit in a 19" system rack.
Instructions for proper grounding and connecting all necessary cables for operation.
Visual representation of the VM0808H hardware installation and connections.
Explains the LCD display, pushbuttons, and tuner dials on the front panel.
Details how to enter the password and navigate the main operational screen.
Outlines the menu structure and how to use pushbuttons for navigation and selection.
Step-by-step guide for setting the IP address, subnet mask, and gateway.
How to use the IR remote to switch input sources for output displays.
Instructions for powering individual or all output displays on/off using the remote.
Introduction to remote access via the Browser GUI and how to log in.
Explains the color coding used to indicate connection status on the GUI.
Configuration options for IP address, subnet mask, gateway, and website timeout.
Steps to add new profiles to the selection list or remove existing ones.
Instructions for logging into the VM0808H via Telnet and accessing the configuration menu.
Overview of RS-232 commands and requirements for the control tool software.
Essential safety precautions for handling and operating the device.
Contact details for technical assistance, online support, and telephone support.
To Next Page
