ATEQ VT30 - Powering On and Vehicle Selection; Power On Device; Vehicle Selection; Sensor Triggering Process

TABLE OF CONTENTS
Section A - GENERAL DESCRIPTION
A1 - Front face – page 3/10
A2 - Power Supply – page 4/10
A3 - USB connector – page 4/10
Section B - UPDATE THE TOOL
B1 - Install WebVT software – page 5/10
B2 - VT30 boot mode – page 5/10
B3 - Update the tool – page 6/10
Section C - TRIGGERING SENSOR(S)
C1 - Testing a TPM Sensor – page 7/10
C2 - Results Description – page 9/10