ATEQ VT30 - B3 - Update the Tool

B
B3 - UPDATE THE TOOL
Step 1 – Put the device into boot mode.
BOOT
0010084
V1
.
04
USB : DISCONNECTED
S/N:K300-14000
Step 2 – Connect the USB cable from
your PC to the device. The device
confirms the connection.
BOOT
0010084
V1
.
04
USB : CONNECTED
S/N:K300-14000
Step 3 – Start the WebVT software.
If your Internet connection needs a Login
and password, enter them.
Step 4 – The software is searching for
the device.
Once detected, the software displays the
device information.
If news versions are available for
download, the software prompts you to
update, follow instructions.
To update the device, hit the
key.