VT36 TPMS TOOL user guide
UM-36400C-U User manual ATEQ VT36 Page 28/32
3.1. INSTALL WEBTPM PC SUITE
1) Connect the TPMS tool to the USB port and power the tool ON.
2) Insert the CD, supplied with your tool, into the PC drive and click on the WebTPM icon
to start the program.
3) A screen will appear that says “Welcome to the Install Shield Wizard for WebTPM.”
Click “Next >”
4) A window will appear to choose destination location, click “Next >”
5) Follow instructions until the window with the “Finish” button appears.
6) Click “Finish” when the WebTPM installation is complete.
Note: To order annual update software part number, please see your dealer for availability
and pricing.
3.2. USB INTERNET OPTION UPDATING
Before updating, ensure that the battery charge is full.
1) Connect the USB cable from the TPMS TOOL to the PC, and turn the device on.
2) Start WebTPM software.
3) A screen will appear indicating “Update Device”.
4) You can also print “Valve IDs” from here as well.
5) Press “Yes” to update to the latest software version. Update will take several minutes
to complete and the status bar will indicate the percentage of update completed.
Warning!
Do not disconnect the TPMS TOOL from the PC or turn off your computer during the
update process. This may result in serious damage to the tool.
www.tpms-tool.com
To Next Page
Loading...