ATEQ VT36 - Device Settings and Configuration; Accessing and Modifying Settings

VT36 TPMS TOOL user guide
UM-36400C-U User manual ATEQ VT36 Page 19/32
SETTINGS
1. ENTER SETTINGS MENU
MAIN MENU
SETTINGS
SETTINGS
> UNITS : PSI/°F
FORMAT : AUTO
BUZZER ON : YES
CONTRAST: 80 %
> UNITS : PSI/°F
FORMAT : AUTO
BUZZER ON : YES
CONTRAST: 80 %
AUTO OFF:60min
ZONE : EUROPE
Complete listing.
Scroll up and down to select function or settings.
Enter menu or validate settings by enter key.
Key functional descriptions:
ZONE: to select the area of work, AMERICA, EUROPE or KOREA.
UNITS: change the air pressure and temperature display (kPa, Bar or PSI with F° or C°).
FORMAT: change the format of sensor ID display.
BUZZER: turn buzzer to ON or OFF (YES or NO).
CONTRAST: adjust LCD backlight brightness level (0% to 100%).
AUTO OFF: time to turn off the device automatically after not being operated.