EasyManua.ls Logo

Ather 450 - Disconnecting the Charger Cable

Ather 450
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To plug out the cable, turn the key to the
ON position, it will unlock the connector.
Keep the key in the ON mode, wait for 3 to
5 seconds, then remove the charging
connector, and put it back in the holder
on the Point.
Remember to close the charging port flap
on the vehicle.
You can check the charge on the vehicle &
charging status using your phone app & by
tapping on the touch screen dashboard
while it’s charging.
UN-PLUGGING IT
Do not leave the connector on the ground.
There’s a risk of damage and water entry,
hence something to be cautious about.
Do not try to forcefully pull the connector
out, try turning the key to OFF and back
to ON and try again, it should come out
effortlessly.
CAUTION

Related product manuals