ATI Technologies Radeon X1600 Series - Set the Anti-Aliasing Preference Manually

Set the Anti-Aliasing preference manually 67
This page is useful when it is not necessary to preview the adjusted settings
because the effect is already known or understood.
Set the Anti-Aliasing preference manually
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Ensure the application override is disabled. To do so, make sure the
Let the Application Decide check box is cleared. The slider control
will become available.
4 Click the Control slider and move the selector to your preferred
setting:
• To increase processing performance, move the slider to the left.
• To increase image quality, move the slider to the right.
Set the Transparent Anti-Aliasing
1 Expand 3D in Advanced View.
2 Click All Settings.
3 Ensure the application override is enabled. To do so, make sure the
Let the Application Decide check box is selected.
4 Click Transparent Anti-Aliasing.
Note: The slider control becomes unavailable.
Set the Anisotropic Filtering preference manually
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Ensure the application override is disabled. To do so, make sure the
Let the Application Decide check box is cleared. The slider control
will become available.
4 Click the Control slider and move the selector to your preferred
setting:
• To increase processing performance, move the slider to the left.
• To increase image quality, move the slider to the right.
Set the Anisotropic Filtering to automated preference
1 From the Tree View pane, expand 3D.