Atlantic Furniture Boston Headboard User Manual

Adult assembly
Before assembling your headboard, please read through these
Page 1 of 2
Step 1
Instructions apply for bed sizes
PARTS LIST HARDWARE
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726
READY
ASSEMBLE
TO
instructions carefully and familiarize yourself with the different parts.
HEADBOARD PANEL 1 PC
1
2
3
1 PC
1 PC
LEFT LEG
RIGHT LEG
Split washer - 4 pcs
Flat washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
HARDWARE FOR METAL BED FRAME
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
F
E
D
Allen wrench - 1pc
Spare - 1pc
FOR BED FRAME ASSEMBLY follow assembly instructions included with your bed frame.
If you purchased a wood headboard to attach to metal bed frame, please refer to page 2.
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
JCB M6 X 35mm (1 3/8”) - 4 pcs
Spare - 1 pc
B
G
A
Wooden dowel - 4 pcs
Spare - 1 pc
Attach the left leg (2) and right leg (3) to headboard panel (1),
using wooden dowels (A) and JCB M6 X 35mm (B).
Tighten with the Allen wrench (G).
Adult assembly
Wood dowel
JCB M6 X 35mm
1
2
3
A
B
A
B
B
B
A
JCB M8 X 15mm ( 5/8") - 4 pcs
C
A
Assembly headboard to open bed frame

Atlantic Furniture Boston Headboard Specifications

General

Brand	Atlantic Furniture
Model	Boston Headboard
Category	Indoor Furnishing
Language	English

Summary

Boston Headboard Assembly Instructions

Assemble Headboard Components

Attaches legs to the headboard panel using wooden dowels and bolts.

Attach Headboard to Metal Bed Frame

Connect Headboard to Metal Frame

Attaches the headboard assembly to a metal bed frame using specific hardware.

Open Bed Frame Queen Assembly Instructions

Step 1: Attach Legs to Foot Rail

Connects legs to the foot rail using JCB M6 X 110mm bolts and barrel nuts.

Step 2: Attach Side Rails

Connects side rails to the foot rail using JCB M8 X 15mm bolts.

Step 3: Attach Frame to Headboard

Connects the assembled bed frame to the headboard using M8 bolts.

Step 4: Attach Support Legs

Attaches support legs to slat supports 1 and 2 using allen screws.

Bed Drawer Set of 2 Assembly Instructions

Step 1: Assemble Drawer Sides to Face

Attaches drawer sides to the drawer face using JCB M6 X 1" bolts.

Step 2: Install Drawer Bottoms and Middle

Guides drawer bottoms and middle into grooves before attaching the drawer back.

Step 3: Attach Drawer Back

Attaches the drawer back to the assembly using bolts and screws.