Atlantic Furniture Portland Headboard User Manual

ASSEMBLY INSTRUCTIONS
Before assembling your headboard, please read through these
instructions carefully and familiarize yourself with the different parts.
PORTLAND HEADBOARD
Page 1 of 3
BACK VIEW
Step 1
Step 2
1
1
6
6
2
5
3
B
B
B
B
B
C
C
C
C
Instructions apply for bed sizes
QUEEN > KING
PARTS LIST HARDWARE
JCB M6 X 70mm (2 3/4”) - 4 pcs
Spare - 1 pc
B
A
C
D
H
HEADBOARD PANEL
1 PC
1
2
3
5
6
4
1 PC
1 PC
1 PC
2 PCS
2 PCS
LEFT LEG
RIGHT LEG
PILLOW STOP
PACKING STICK
SPACER BLOCK
Allen wrench - 1pc
Spare - 1pc
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726
Barrel nut - 4 pcs
Wooden dowel - 8 pcs
Wood screw - 4 pcs
Spare - 1 pc
Spare - 2 pcs
Spare - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
READY
ASSEMBLE
TO
Attach the legs (2) and (3) to the headboard panel (1) and pillow stop (5),
using JCB (B) and barrel nut (C). Tighten with the Allen wrench (H).
5
4
4
4
2
3
D
D
A
A
PO :
Remove packing stick (6) from headboard panel (1) and . Insert wooden dowels (A) to theDISCARD
locator holes on spacer block (4) and pillow stop (5). Attach the spacer blocks (4) to the legs (2) and
(3), using wood screws (D), as shown below. Tighten with Phillips screwdriver. (customer supplied)
Adult assembly
If you purchased a wood headboard to attach to metal bed frame, please refer to page 3.
Split washer - 4 pcs
Flat washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
HARDWARE FOR METAL BED FRAME
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
G
F
E

Atlantic Furniture Portland Headboard Specifications

General

Assembly Required	Yes
Product Type	Headboard
Finish	Multiple finishes available
Size Options	Twin, Full, Queen, King
Material	Solid Wood

Summary

Portland Headboard Assembly

Parts and Hardware Identification

Lists and identifies all components and hardware needed for headboard assembly.

Headboard Assembly Steps

Provides step-by-step instructions for assembling the headboard.

Wood Bed Frame Assembly

Footrail Options

Describes the two types of footrails and their leg options for the bed frame.

Footboard Options

Explains how to attach side rails to the panel footboard using different pin sets.

Attaching Headboard to Metal Bed Frame

Hardware for Metal Frame Attachment

Identifies hardware needed to connect the headboard to a metal bed frame.

Metal Frame Assembly Step

Details the single step for attaching the headboard assembly to the metal bed frame.