Atlantic Furniture MISSION User Manual

READY
Page 1 of 3
Adult Assembly
ASSEMBLY INSTRUCTIONS
Before assembling your End Table, please read through these
instructions carefully. Familiarize yourself with the different parts.
MISSION END TABLE-CHARGING STATION
MISSION END TABLE-CHARGING STATION
AE
D
B
F
C
Flat washer - 8 pcs Wooden Dowel 3/8 X 1 1/4” - 4 pcs
Wooden Dowel 1/4” X 1 1/4” - 4 pcs
Spare - 2 pcs
Spare - 1 pc
Spare - 1 pc
JCB M8 - 4 pcs Wood Screw - 8 pcs
Spare - 1 pc
Spare - 2 pcs
Allen wrench - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE JCB, WOODEN DOWEL OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
PARTS LIST
01
02
03
04
TOP PANEL 1 PC
4 PCS
2 PCS
1 PC
LEG
SIDE PANEL
LOWER SHELF
01
02
04
03
03
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com 1-800-955-3726 / M-F 9:00-5:00 EST

Atlantic Furniture MISSION Specifications

General

Brand	Atlantic Furniture
Model	MISSION
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions

Step 1: Attach Legs to Top Panel

Attach the legs to the top panel using flat washers and JCB, tighten with Allen wrench.

Step 2: Install Dowels

Install wooden dowels into the locator holes on the side and lower shelf panels.

Step 3: Attach First Side Panel

Attach the first side panel to the end table, aligning dowels and tightening wood screw.

Step 4: Attach Second Side Panel and Lower Shelf

Attach the second side panel, placing the lower shelf by aligning dowels with side panel holes.

Step 5: Secure Lower Shelf

Apply pressure to eliminate gaps between the lower shelf and side panel, securing with wood screws.