Atlantic Furniture Columbia Twin Bunk Bed User Manual

Size of Mattress and Foundation
The length and width of the upper bunk mattress and foundation are as follows :
Width
37½”-38½”
Length
74”- 75”
Thickness
9 ½” max
You must use only this size mattress.
Ensure thickness of mattress and foundation combined does not exceed 9 ½”
and that the mattress is at least 5” below upper edge of guardrails.
This Bunk Bed uses a slat kit for mattress foundation.
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from any
Atlantic Furniture dealer
SAFETY WARNINGS
! !
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
Always use the recommended size mattress or mattress support, or both,
to help prevent the likehood of entrapment or falls.
Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other component are
in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed, and prohibit jumping on the bed.
Always use ladder for entering or leaving upper bunk.
Do not use substitute parts. Contact the manufacturer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to a wall, the guardrail that runs the full length of the bed must be placed
against the wall to prevent entrapment between the bed and the wall.
The use of water or sleep flotation mattress is prohibited.
Prohibit more than one person on upper bunk.
STRANGULATION HAZARD : Never attach or hang items to any part of the Bunk Bed
that are not designed for use with the bed: for example, but not limited to, hooks, belts
and jump ropes.
Keep these instructions for future reference.
Page1of7
BUNK SAFETY WARNING TT 09282009

Atlantic Furniture Columbia Twin Bunk Bed Specifications

General

Brand	Atlantic Furniture
Model	Columbia Twin Bunk Bed
Category	Indoor Furnishing
Language	English

Summary

Mattress and Foundation Specifications

Safety Warnings and Precautions

Essential safety guidelines for using the bunk bed, including entrapment hazards and prohibited actions.

Hardware Identification and Usage

JCB M6 X 3 1/2" Fastener

Used to fix panels to long rails in the upper and lower bunk structures.

1" Wood Screw

Used to fix end caps to the upper long rail during assembly.

JCB M6 X 2" Fastener

Used to fix end caps to the guard rail components.

Metal Pins

Components used to connect upper panels to lower panels in Step 7.

Barrel Nut

Fastener used with JCB screws for secure panel and rail attachment.

Allen Wrench

Tool provided for tightening JCB M6 screws during assembly.

Parts List

Hardware Components

Details of all fasteners and small parts included in the assembly kit.

Upper and Lower Panels

Main structural panels forming the sides of the bunk bed.

Guardrail Components

Full and 3/4 guardrails for the upper bunk safety.

End Caps and Long Rails

Components for finishing and structural support.

Twin Slat Kit

Slats for supporting the mattress on both bunk levels.

Assembly Steps

Step 1: Attach Long Rails to Upper Panels

Connect long rails to upper panels using specific hardware.

Step 2: Install Guardrails

Attach full and 3/4 guardrails to end caps and panels.

Step 3: Lay Twin Slat Kit

Position and secure the slat kits onto the bed frame.

Step 4: Install Guard Rail Assemblies

Fix the assembled guard rails onto the long rails.

Step 5: Attach Long Rails to Lower Panel

Connect long rails to the lower bunk panel.

Step 6: Lay Slat Kit with Center Support

Place and secure the slat kit with center support.

Step 7: Insert Metal Pins and Connect Panels

Join upper and lower panels using metal pins.

Step 8: Install Ladder

Attach the ladder to the bunk bed structure.