Need help?Do you have a question about the Atlantic Technology T70 PBM and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 10 inches |
| Frequency Response | 25Hz - 150Hz |
| Enclosure Type | Sealed |
| Inputs | Line-level RCA |
Features a 10" treated cellulose pulp cone, vented motor, and 4-layer voice coil for high performance.
Provides deep, smooth bass response with a predictable roll-off below resonance.
A custom-designed discrete amplifier precisely matched to the driver for accurate control.
Offers a useful in-room frequency response from 25Hz to 150Hz.
Steeper roll-off allows for exceptional integration with satellite speakers.
Features two line inputs and two line thruputs for flexible connectivity and daisy-chaining.
Includes high-level stereo inputs and high-pass outputs for connecting with amplifier speaker outputs.
Allows precise acoustic matching with speaker systems and room acoustics.
A control located on the rear panel for adjusting the subwoofer's output level.
Features automatic signal sensing for turn-on and a 7-12 minute turn-off delay.
The product is designed and built to meet all UL safety requirements.
Describes connecting via RCA jacks from receiver/preamp outputs using shielded cables.
Explains how to pass a line-level signal through the subwoofer to another unit.
Details connecting using amplifier's speaker outputs with high-quality wire.
Describes sending a high-level signal to front speakers, with bass filtered out.
Illustrates connecting the subwoofer using the receiver's subwoofer line out or preamp output.
Shows how to connect a single subwoofer from a stereo receiver's preamp outputs.
Illustrates connecting two subwoofers using preamp line outputs, utilizing L/MONO inputs.
Details the common method of connecting one subwoofer via speaker outputs.
Shows the common method for connecting two subwoofers using speaker outputs.
Instructions for connecting the power cord and notes on AC outlet usage.
Explains optimal subwoofer placement, generally in front of the room or near corners, with experimentation advice.
Discusses asymmetrical placement for two subwoofers to reduce room resonances.
Provides guidance on adjusting the level control for optimal bass response without an SPL meter.
Guides on setting the crossover frequency based on satellite speaker characteristics for optimal integration.
Explains how to use the phase switch for acoustic matching and smooth satellite-subwoofer transition.
Recommends Normal mode for center channel and Small setting for speakers with digital systems.
Provides instructions on cleaning the cabinet and protecting it from damage.
To Next Page