Do you have a question about the Atlantic Technology 222 PBM and is the answer not in the manual?
Details on drivers, power output, frequency range, and filter settings.
Specific connection method for THX systems using Subwoofer Out.
How to connect the power cord and the auto on/off feature.
Guide to selecting voltage and replacing fuses.
Initial setup, volume/filter adjustment, and phase setting.
Common problems, causes, and solutions for subwoofer issues.
| bass driver | 10" |
|---|---|
| output power (rms) | 125W |
| distortion (amplifier) | 0.05% max |
| frequency response | 35Hz – 125Hz |
| input impedance high level (speaker) | 10kΩ |
| input impedance low level (line) | 1kΩ |
| peak SPL | 102dB |
| power requirements | 120V AC 50/60Hz, 240V AC 50/60Hz |
|---|
| dimensions (W x H x D) | 19.75 x 14.75 x 13.75in, 502 x 375 x 350mm |
|---|---|
| weight | 44lbs/97kg |
| bass driver | 12" |
|---|---|
| output power (rms) | 150W |
| distortion (amplifier) | 0.05% max |
| frequency response | 35Hz – 125Hz |
| input impedance high level (speaker) | 10kΩ |
| input impedance low level (line) | 1kΩ |
| peak SPL | 105dB |
| power requirements | 120V AC 50/60Hz, 240V AC 50/60Hz |
|---|
| dimensions (W x H x D) | 19.75 x 14.75 x 13.75in, 502 x 375 x 350mm |
|---|---|
| weight | 53lbs/117kg |
| bass driver | 12" |
|---|---|
| output power (rms) | 200W |
| distortion (amplifier) | 0.05% max |
| frequency response | 35Hz – 125Hz |
| input impedance high level (speaker) | 10kΩ |
| input impedance low level (line) | 1kΩ |
| peak SPL | 108dB |
| power requirements | 120V AC 50/60Hz, 240V AC 50/60Hz |
|---|
| dimensions (W x H x D) | 15.75 x 19.75 x 19in, 400 x 502 x 483mm |
|---|---|
| weight | 65lbs/144kg |





