Where to install your device?
This equipment was designed to be installed in a residence. Please
ask your distributor before using it for any other purpose.
The device should be installed according to normal trade practice
and incompliance with legislation in the relevant country (NFC 15-
The equipment is class 2 and is protected against splashed water IP
24. The device can be installed in volume 2 of a bathroom It’s forbidden
to install the device in the volume 1. The device is to be installed so
that switches and other controls cannot be touched by a person in
Do not install the device :
In a draught that might affect adjustment (for example, under a central
mechanical ventilation unit etc...).
Under a fixed power socket or near curtains or other combustible
In a conform position, the air outlet grid and the control unit is visible
in the upper part of the device. It is forbidden to install a vertical unit
horizontally and vice versa.
PREPARE THE INSTALLATION OF THE DEVICE
If using the appliance on the move:
Do not use near a bath, shower or swimming pool.
Do not use in small premises when they are occupied by people who
are unable to leave the room on their own, except where constant
Do not use the appliance if it has been dropped.
Do not use the appliance if there are visible signs of damage.
8VHWKHDSSOLDQFHRQDKRUL]RQWDODQGVWDEOHVXUIDFHRUÀ[LWWRWKH
7R UHGXFH WKH ULVN RI ÀUH NHHS WH[WLOHV FXUWDLQV RU DQ\ RWKHU
ÁDPPDEOHPDWHULDODPLQLPXPGLVWDQFHRI