Atlantic SOLIUS - Expert Menu and Settings; Expert Menu Access; Expert Menu Parameters

28
Réinitialisation
Clock
To set the date, the time
MENU
OK
OK
PARAMETERS
Restrictions
Max temp.
Access contr.
To adjust the setpoint temperature to the
temperature recorded in the room if you notice a
difference after several hours' heating.
The calibration value is between -3° C below and +3°
C above the set temperature.
E.g.: if the room T° = 18°C and the set T° = 20°C,
select -2.0°.
General
T° calibration
Sound
To activate or deactivate the key sound.
To limit access to the commands.
You may choose total access, access to temperature
only or no access. In this last case, the unit's commands
are no longer accessible.
Language
To select the language.
Language
To select the language.
To record a maximum setpoint temperature which
may not be exceeded (between 22°C and 30°C).
PIN code
To activate the saving of an Expert Menu personal
access code or not.
Once activated, the Expert Menu access is coded.
You may note your personal code here
To deactivate it, go back to the Expert Menu, enter
your personal code and go back to Parameters =>
Restrictions => PIN code.
The EXPERT menu
To access the appliance’s advanced functions, press and at the same time for
over 3 seconds.