30 6996 0223 70
Safety
The operator must apply all relevant Safety precautions.
Outdoor/altitude operation
The pumps are not designed for outdoor use.
The pumps can only be used in temperatures above 0° C (+32° F). If frost might occur, the appropriate measures
should be taken to avoid damage to the machine and its ancillary equipment. In this case, consult Atlas Copco.
Also if operating above 1000 m (3300 ft.), consult Atlas Copco.
Moving/lifting
The pump is delivered on a wooden pallet. During transport, the pump is secured to the pallet using bolts.
Remove the transport fixation bolt before lifting. Lift the pump carefully with a hoist of appropriate lifting capacity.
The lifting eye (1) provided at the top of the pump for lifting. See figure below.
The pump can be moved by a hoist using the lifting eye. Take care not to damage the bodywork during lifting or
transport.
To Next Page
Loading...
