Safety Information ETB
8
© Atlas Copco Industrial Technique AB - 9836 1316 08
ServAid facilitates the ordering process of spare
parts, service tools and accessories for the product
of your choice. It is continuously updated with in-
formation of new and redesigned products.
You can use ServAid to present content in a spe-
cific language, provided that translations are avail-
able, and to display information about obsolete
products. ServAid offers an advanced search func-
tionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco
sales representative or e-mail us at:
servaid.support@se.atlascopco.com
Symbols on the tool
The symbols on the tool have the following mean-
ings:
A Directive 2006/42/EC
on Machinery specifies
the essential health and
safety requirements the
product has to meet in
order for the manufac-
turer to affix the CE
marking.
B When operating the de-
vice be sure to use cau-
tion.
C The symbol indicates
that parts within the
product must be handled
in accordance with the
WEEE Directive.
D Read the instruction
manual/booklet before
starting work or before
operating equipment or
machinery.
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products
sold by Atlas Copco.
For more information, consult the website
http://www.atlascopco.com/.
Choose Products - Safety Data Sheets, and fol-
low the instructions on the page.
Decommissioning
Recycling instruction
When a product has served its purpose it has to be
recycled properly. Dismantle the product and recy-
cle the components in accordance with local legis-
lation.
Batteries shall be taken care of by your national
battery recovery organization.
Technical data
Technical data
Noise and vibration emission
Noise (in accordance
with PN8NTC1.2)
dBA
Sound pressure level <70
Sound power level -
Uncertainty -
Vibration total value,
valid from 2010
(3-axes value in accor-
dance with -)
m/s
2
Vibration value -
Uncertainty -
To Next Page
Loading...
