Control panel Elektronikon Swipe™
Check the main screen (6) regularly for readings and messages. The display normally shows the
compressor. outlet pressure, while the status of the compressor is indicated by pictographs.
Remedy the trouble if alarm LED (1) is lit or flashes, see section Shutdown warning, Shutdown
and Problem solving.
The panel will show a service indication (2) if a service plan interval has been exceeded or if a
service level for a monitored component has been exceeded.
Carry out the service actions of the indicated plans or replace the component and reset the
relevant timer, see section Service warning.
Instruction book
106 2920 7118 31
To Next Page
Loading...
