Atlas Copco GHS 585 VSD+ - Page 29

Instruction book
6996 0227 40 29
Procedure
Starting from the Main screen (see Main screen):
• Move the cursor to the action button Menu and press the enter key, following screen appears:
(i)
Menu
(ii)
Regulation
• Using the scroll keys, move the cursor to the inputs icon (see above, section Menu icon)
• Press the enter key, a screen similar to the one below appears:
(i)
Inputs
(ii)
Discharge pressure
(iii)
Inlet pressure
(iv)
Emergency stop
(v)
Pressure setting selection
• The screen shows a list of all inputs with their corresponding icons and readings.