Instruction book
6996 0227 40 45
To modify, select the Modify button using the Scroll keys and press the Enter key.
A screen similar to the one above is shown, the first item (Language) is highlighted. Use the key of the
Scroll keys to select the setting to be modified and press the Enter key.
A pop-up screen appears. Use the up or down key to select the required value and press the Enter key
to confirm.
In the setting menu, it is possible to adjust:
- Runtime at minimum pressure- Gas Ballast (Automatic - Manual)
For Humid version pumps:
- Maximum Pre Purge Time
- Maximum Pre Purge Time during Operation
- Post Purge Time
- Manual Purge Time
To Next Page
Loading...
