To Next PageTo Next Page
Need help?Do you have a question about the Atlas Copco LE9N and is the answer not in the manual?
General| Model | LE9N |
|---|---|
| Working Pressure | 10 bar / 145 psi |
| Motor Power | 2.2 kW / 3 hp |
| Number of Cylinders | 2 |
| Control System | Pressure switch |
| Type | Piston |
Overview of LE, LEN and LT compressor types, their variants, and working pressures.
Description of the air intake, compression, and discharge process for different compressor models.
Explanation of how the compressor pressure is controlled using switches and valves.
Guidelines for safe and correct electrical installation and wiring of the compressor unit.
Procedures for first-time operation, including checks, voltage connection, and direction of rotation.
Steps to start the compressor, select operating mode, and open the air outlet valve.
Safe procedures for shutting down the compressor, including switching off voltage and closing valves.
A schedule of recommended maintenance tasks at various intervals for optimal compressor upkeep.
Instructions for replacing unloader or check valve assemblies based on operating hours.
Procedures for replacing compressor valves, including disassembly and reassembly guidance.
Steps for servicing and replacing the air filter element to ensure clean air intake.
How to adjust the stopping and starting pressures by modifying the air pressure switch settings.
Annual testing procedure for the safety valve and criteria for replacement.
Guidance on testing and replacing the relief valve, which protects the low-pressure side.
