EasyManua.ls Logo

Atlas Copco LF 3

Atlas Copco LF 3
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2920 7090 00 15
Instruction book
CD adsorption dryer
LF 2-3 on 90 and 250 receiver
Heavy duty air inlet filter
For PP-BM-TM-FF versions
Oil level switch
Not available for LF
Receiver wheel set
Wheelset for 90/250 receiver
Power supply cable
(3 m)
with red CEE 3-pole plug 16A L = 3 mtr
Auto restart
offload valve (solenoid valve to make sure unit will
start after power failure)
Timer drain
(solenoid operated)
Used For DOL 230v/50hz and
400v/50hz Units
Invalid Combinations for Any other voltages or
frequencies and YD units
2.3 Air flow
LF 2 up to LF 10
Air drawn through air filter (AF) and inlet silencer (1) into cylinders (2 and 3) is compressed, then discharged
through cooler piping (4) and (5) and check valve (CV) / unloader valve (UA) into air receiver (AR).

Related product manuals