Need help?Do you have a question about the Atlas Copco GA 18 and is the answer not in the manual?
General| Model | GA 18 |
|---|---|
| Category | Compressor |
| FAD | 1.8 m³/min |
| Type | Screw Compressor |
| Free Air Delivery | 1.8 m³/min |
General safe working practices and regulations.
Safety measures for proper installation and setup.
Guidelines for safe compressor operation.
Crucial safety steps for maintenance and repair.
Lists and describes main electrical system components.
Explains the compressed air path through the dryer.
Details the refrigerant flow and function within the dryer.
Details the components and functions of the control panel.
Explains shutdown warning indicators and procedures.
Lists conditions causing compressor shutdown.
Details the components and functions of the graphic controller panel.
Explains shutdown warnings on the graphic controller.
Lists shutdown causes for the graphic controller.
Guidelines for compressor unit placement and clearances.
Instructions for making electrical connections.
Steps for the first-time startup procedure.
Procedures for starting the compressor.
Key checks and considerations during operation.
Procedures for stopping the compressor normally and in emergencies.
Outlines routine checks and service intervals.
Recommends specific lubricants and their properties.
Procedures for inspecting and replacing the air filter.
Step-by-step guide for changing oil and filter.
Information on the location and testing of safety valves.
Provides data for selecting cables and fuses.
Detailed technical specifications for different models.
Usage instructions and warnings for the oil separator vessel.
Usage instructions and maintenance for the air receiver.
To Next Page