The screen shows that the outlet temperature is 82 ˚C.
• For Full-Feature compressors:
Press Scroll button (12). The dewpoint temperature will be shown:
The screen shows that the dewpoint temperature is 3 ˚C.
• Press Scroll button (12) to scroll downwards or upwards through the screens.
7.10 Digital inputs
Control panel
Starting from the Main screen, press Scroll button (12) until <d. In> is shown and then press the Enter
button (13). A screen similar to the following appears:
The screen shows (from left to right) the status of the emergency stop contact and the compressor motor
overload protection (1 = contact closed, 0 = contact open).
Instruction book
2920 7140 90 37
To Next Page
Loading...
