17 Pressure equipment directives
Components subject to 97/23/EC Pressure Equipment Directive
Compressor type Part number Description PED class
GA 15 up to GA 26 6211 1115 69
2200 9507 63
2202 8410 01
Safety valve IV
Component Description Approval Volume Design
pressure
Design
temperature
PED class
1625 4815 01 Oil separator
vessel
29 l 15 bar -10 / 120 °C SPV
2204 1005 01 Air receiver CE 500 l 16 bar -10 / 120 °C SPV
2204 1005 03 Air receiver ASME/CRN 500 l 200 psi -10 / 120 °C
2204 1005 02 Air receiver DIR 500 l 1400 kPa -10 / 120 °C
Component Description Minimum wall thickness Inspection
frequency (1)
1625 4815 01 Oil separator vessel See the declaration of the
manufacturer of the vessel
10 years
2204 1005 01
2204 1005 02
2204 1005 03
Air receiver
Air receiver
Air receiver
See the declaration of the
manufacturer of the vessel
See the declaration of the
manufacturer of the vessel
See the declaration of the
manufacturer of the vessel
1 year
(1) The minimum wall thickness must be respected at all times. Inspection techniques such as ultrasonic or
X-ray are equivalent to hydrostatic testing for this equipment.
The compressors conform to PED smaller than category II.
Instruction book
2920 7140 90 163
To Next Page
Loading...
