Next, use the scroll buttons to go to the regulation icon (2) and press the Enter button:
There are 3 possibilities, of which you can select 2 by default:
• Local control
• Remote control (not selectable)
• LAN control (network)
After selecting the required regulation mode, press the enter button on the controller to confirm your
selection. The new setting is now visible on the main screen. See section Icons used for the meaning of the
icons.
Contact Atlas Copco to activate remote control.
8.13 Service menu
Menu icon, Service
Function
• To reset the service plans which are carried out.
• To check when the next service plans are to be carried out.
Instruction book
88 2920 7140 90
To Next Page
Loading...
