Selection of a main screen view
To change between the different screen layouts, select the far right icon in the control icons line (see value
lines display icon or chart display icon in section Icons used) and press the Enter key. A screen similar to
the one below opens:
Select the layout required and press the Enter key. See also section Inputs menu.
8.5 Shutdown warning
If the compressor element outlet temperature exceeds the shutdown warning level (see section
Programmable Settings), warning LED (4) will light up and a warning icon (1) is shown in the lower side
of the display as in below image:
Using the scroll keys (12), select warning icon (1) and press enter key (10) to see the Protections menu:
Instruction book
2920 7140 90 75
To Next Page
Loading...
