Safety valve test
In the test screen <t. 2>, a safety valve test is provided. The safety valves can only be tested after entering a
code. Consult Atlas Copco if the safety valves are to be tested.
7.33 Web server
All Elektronikon controllers have a built-in web server that allows direct connection to the company
network or to a dedicated PC via a local area network (LAN). This allows to consult certain data and
settings via a PC instead of the display of the controller.
Getting started
If the compressor is equipped with a SMARTBOX, the network connection of the
Elektronikon is already in use. To allow the web server functionality, the network cable
that is connected to the SMARTBOX should be unplugged and replaced by the cable of
the company network.
If both the web server functionality and SMARTBOX are required, please contact your
local Atlas Copco Customer Centre for support.
Make sure you are logged in as administrator.
• Use the internal network card from your computer or a USB to LAN adapter (see picture below).
USB to LAN adapter
• Use a UTP cable (CAT 5e) to connect to the controller (see picture below).
Instruction book
54 2920 7140 90
To Next Page
Loading...
