10.5 Taking out of operation
Warning
The operator must apply all relevant Safety precautions.
Procedure
Step Action
1 Stop the compressor and close the air outlet valve.
2 Open the manual condensate drain (if provided).
3 Switch off the voltage and disconnect the compressor from the mains.
4 Unscrew the oil filler plug only one turn to permit any pressure in the system to escape.
5 Shut off and depressurize the part of the air net which is connected to the outlet valve.
Disconnect the compressor air outlet pipe from the air net.
6 Drain the oil.
7 Drain the condensate circuit and disconnect the condensate piping from the condensate net.
Instruction book
132 2920 7140 90
To Next Page
Loading...
