Text on image
(1)
General
(2)
Dryer Dewpoint Protection
(3)
Triggered
It remains possible to scroll through other screens, using the Scroll keys (12) to check the actual status of
other parameters.
Press stop key (13) to stop the compressor and wait until the compressor has stopped.
Switch off the voltage, inspect the compressor and remedy. The warning message will disappear as soon
the warning condition disappears.
8.8 Calling up menus
Control panel
Control panel
(1) Scroll keys
(2) Enter key
(3) Escape key
Description
When the voltage is switched on, the main screen is shown automatically (see section Main screen):
Typical Main screen (2 value lines), fixed speed compressors
Instruction book
2920 7140 90 81
To Next Page
Loading...
