Control panel Elektronikon®
Control panel Elektronikon® Graphic
Step Action
1 Open the air outlet valve.
2 Switch on the voltage. Check that voltage on LED (6) lights up.
3 Press start button (1) on the control panel. The compressor starts running and the automatic
operation LED (8) lights up.
10.3 During operation
Warnings
The operator must apply all relevant Safety precautions. Also consult section Problem
solving.
Removing the front panel (service panel) during operation will lead to an automatic
shutdown of the unit after a certain time depending of the compressor version.
Keep the doors closed during operation.
When the motors are stopped and LED (8) (automatic operation) is alight, the motors may
start automatically.
Instruction book
128 2920 7140 90
To Next Page
Loading...
