Service kits
For overhauling or carrying out preventive maintenance, service kits are available (see section Service
kits).
Service contracts
Atlas Copco offers several types of service contracts, relieving you of all preventive maintenance work.
Consult your Atlas Copco Customer Centre.
General
When servicing, replace all removed gaskets, O-rings and washers.
Intervals
The local Atlas Copco Customer Centre may overrule the maintenance schedule, especially the service
intervals, depending on the environmental and working conditions of the compressor.
The longer interval checks must also include the shorter interval checks.
Service actions for compressors with an Elektronikon
®
controller
Besides the daily and 3-monthly checks, the service operations are grouped in time intervals (running
hours). The regulator has a programmable service timer. A service warning will appear when the service
timer has reached the programmed time interval; see section Service warning. In this case, check the
running hours. Carry out the service operations corresponding to the running hours as specified in the
schedule below. Reset the service timer after servicing; see section Calling up/resetting the service timer.
Service plans for compressors with an Elektronikon
®
Graphic controller
Besides the daily and 3-monthly checks, preventive service operations are specified in the schedule below.
Each plan has a programmed time interval at which all service actions belonging to that plan are to be
carried out. When reaching the interval, a message will appear on the screen indicating which service plans
are to be carried out; see section Service menu. After servicing, the intervals must be reset, see section
Service menu.
Instruction book
134 2920 7140 90
To Next Page
Loading...
