Atlas Copco LT2

Instruction book
Atlas Copco Stationary Air Compressors
LE2, -3, -5, -7, -10, -15, -20
LT2, -3, -5, -7, -10 (50 Hz)
LT15/60, -15-30, -15, -20, -20-30
LF2, -3, -5, -7, -10
Instruction book
Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium.
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in
particular to trademarks, model denominations, part numbers and drawings.
This instruction book meets the requirements for instructions specified by the machinery directive
98/37/EC and is valid for CE as well as non-CE labelled machines.
No. 2920 1585 00
Registration code: APC L / 38 / 985
2004-07
2920 1585 00 - 1 -

Atlas Copco LT2 Specifications

General

Brand	Atlas Copco
Model	LT2
Category	Air Compressor
Language	English

Summary

Leading Particulars

Regulating System

Installation and Handling

Electrical Connections

Covers wiring requirements and diagrams for safe setup.

Overload Relay and Fuse Settings

Specifies settings for motor protection and circuit safety.

Operating Instructions

Initial Start-up

Step-by-step guide for the first operation of the compressor.

Starting and Stopping Procedures

Instructions for safely powering the unit on and off.

Maintenance and Servicing

Preventive Maintenance Schedule

Outlines regular checks and tasks to maintain performance.

Servicing and Adjustment Procedures

Detailed steps for performing maintenance and adjustments.

Insufficient Air Pressure

Unit Does Not Speed Up

Air Receiver Pressure Rises Above Maximum

Relief Valve Blows

Receiver Does Not Hold Pressure

Unit Does Not Start

Overload Relay Cuts Out

Safety Precautions

Installation Safety

Critical safety directives for installing the equipment correctly.

Operation Safety

Essential safety guidelines for operating the compressor.

Maintenance Safety

Safety measures to follow during servicing and repair.