Atlas Copco LT1230 User Manual

No. 2920 5997 03
Instruction book for Piston Compressors
LE/LT5, -6, -7, -8, -9, -11, -12
LT530, -730, -930, -1230
LE7N, LE9N
LE/LT7, -8, -9, -11, -12 Pack
Industrial Air Division
B-2610 Wilrijk - Belgium
Replaces
No. 2920 5997 02
1994-12
This instruction book meets the requirements for instructions
specified by the machinery directive 89/392/EEC and is valid
for CE as well as non-CE labelled machines

Atlas Copco LT1230 Specifications

General

Maximum Working Pressure	10 bar
Max Pressure	10 bar
Motor Power	11 kW
Voltage	400 V
Frequency	50 Hz
Type	Piston
Power Source	Electric
Weight	485 lb
Dimensions	1200 x 500 x 1200 mm
Tank Capacity	80 l

Summary

2 Installation

3 Operating instructions

3.1 Initial start-up

Step-by-step guide for the first-time setup and operation of the compressor.

3.2 Starting

Procedures for starting the compressor correctly.

3.3 Stopping

4 Maintenance

4.1 Preventive maintenance schedule

Outlines the recommended maintenance tasks and intervals for optimal performance.

5 Servicing and adjustment procedures

5.4 Setting of the air pressure switch

6 Problem solving

1 Insufficient air pressure

Identifies causes and remedies for low air pressure issues.

2 Unit does not speed up

Troubleshooting steps for when the compressor unit fails to increase speed.

9 Electrical diagrams