Need help?Do you have a question about the Atlas Copco LT 2 and is the answer not in the manual?
General| Type | Piston |
|---|---|
| Stages | 1 |
| Working Pressure | 8 bar |
| Free Air Delivery | 6.7 - 16.7 cfm |
| Motor Power | 0.55 kW |
Explains the meaning of various safety symbols used in the manual.
Outlines general safety rules for operators and personnel.
Details safety measures to be followed during the installation process.
Provides essential safety guidelines for operating the compressor.
Lists safety procedures for maintenance and repair activities.
Provides a general description of the air-cooled, two-stage piston compressors.
Lists and describes optional features and accessories for the compressors.
Illustrates the air flow path through different compressor configurations.
Explains the operating principles of the regulating systems for different models.
Provides detailed dimensional drawings for various compressor models.
Guides on proper installation location, ventilation, and electrical setup.
Details on connecting the compressor unit to the power supply.
Specifies settings for overload relays and fuses based on starter type and voltage.
Provides guidance on selecting appropriate cable sizes for the starter types.
Explains the meaning of various pictographs (symbols) used on the unit.
Step-by-step guide for the first-time start-up of the compressor.
Instructions for starting the compressor under normal operating conditions.
Details on how to safely stop the compressor.
Steps for safely decommissioning the compressor.
Recommendations for storing the compressor unit properly.
Refers to the engine owner's manual for maintenance of petrol engines.
Provides a schedule for regular maintenance checks and tasks.
Details on recommended compressor oils and lubrication practices.
Information on available service kits for maintenance.
Guidelines for environmentally friendly disposal of used parts and materials.
Procedures for servicing or replacing the unloader and check valve.
Guidance on servicing and immediate replacement of faulty valves.
Step-by-step instructions for replacing the air filter element.
Instructions for adjusting the stopping and pressure difference settings.
Guidance on adjusting the MDR3 pressure switch and its diagrams.
Details on adjusting the pilot valve for maximum or unloading pressure.
Procedures for testing and replacing the safety valve.
Information on testing and replacing the relief valve.
Specifies the conditions under which technical data is measured.
Outlines the operational limits for temperature and pressure.
Provides detailed technical specifications for various compressor models.
To Next Page
