Atlas Copco QAX 12 Dd S2 APP User Manual

- 36 -
– Diagnostics Menu
This menu is used to power up the engine
electronics without starting the engine. When this
setting is switched ‘on’, electric power will be
supplied to the engine electronics after half a
minute delay. The unit can not be started as long
as this parameter is switched ‘on’.
– Unit Menu
This menu is used to select whether tempreature
and pressure should appear in °C/bar or °F/psi.
– Language selection
Icons is the default factory set language, but 6
other languages can be selected: English, French,
German, Italian, Spanish and Cyrillic (Russian).
All information in the Parameter List display is
always in English.
– Generator Underfrequency: failclass, enable,
delay, setpoint
– Generator Overfrequency: failclass, enable, delay,
setpoint
– Generator Undervoltage: failclass, enable, delay,
setpoint
– Generator Overvoltage: failclass, enable, delay,
setpoint
It's possible to scroll between configuration menu's
by using the pushbuttons UP and DOWN.
Pushing the ENTER button activates the
configuration menu which is shown at the display.

Atlas Copco QAX 12 Dd S2 APP Specifications

General

Brand	Atlas Copco
Model	QAX 12 Dd S2 APP
Category	Inverter
Language	English