Atlas Copco QAX 12 Dd S2 APP User Manual

- 63 -
9.4 Overview of the mechanical
options
The following mechanical options are available:
– Forklift slots
– Undercarriage (axle, towbar, towing eyes)
– Road signalisation
– Lighting tower (only for Metal Canopy 50 Hz
units)
9.5 Desciption of the
mechanical options
The QAX 12-20-24-30-35 can be optionally equipped
with either forklift slots or an undercarriage.
9.5.1 Forklift slots
To be able to lift the QAX 12-20-24-30-35 by means
of a forklift, rectangular holes are provided in the
frame.
9.5.2 Undercarriage (axle, towbar,
towing eyes)
The undercarriage is equipped with an adjustable or
fixed towbar with DIN-eye, AC-eye, IT-eye, GB-eye,
NATO-eye or ball coupling.
9.5.2.1 When using this option
– Make sure that the towing equipment of the
vehicle matches the towing eye before towing the
generator.
– Never move the generator while electrical cables
are connected to the unit.
– Always apply the hand brake when parking the
generator.
– Leave enough space for operation, inspection and
maintenance (at least 1 meter at each side).
9.5.2.2 To maintain the undercarriage
– Check the tightness of the towbar bolts, the axle
bolts and the wheel nuts at least twice a year and
after the initial 50 hours of operation.
– Grease the wheel axle suspension bearings and the
spindle of the brake handle at least twice a year.
Use ball bearing grease for the wheel bearings and
graphite grease for the towbar and spindle.
– Check the brake system twice a year.
– Check the condition of the vibration dampers
twice a year.
– Repack the wheel hub bearings once a year using
grease.
9.5.3 Road signalisation
This option equips the undercarriage with road
signalisation, approved by EC legislation.

Atlas Copco QAX 12 Dd S2 APP Specifications

General

Brand	Atlas Copco
Model	QAX 12 Dd S2 APP
Category	Inverter
Language	English